McLaren Life banner
1 - 3 of 3 Posts

·
Trusted Source for McLaren Performance
Joined
·
474 Posts
Discussion Starter · #1 ·
With bigger and better projects on the horizon, we felt the time was right to release our previous dyno session that set the highest HP record of ANY McLaren on just boost, no nitrous, at 1041 HP / 856 TQ on 36 psi and upgraded intercoolers. This is our own shop car.

As many of you already know, this was made possible by our "Bulletproof Racing Block", built in-house 2 years ago with upgraded internals. Since we race, this built engine has seen many track days, logged well over a 100 WOT pulls and saw 40 psi at the end of last year and is still making massive power. Given the success here, we are eagerly making small tweaks for a 2.0 version for even BIGGER power and higher profile partnerships to come in the near future.

Thank you to everyone who helped to make this possible. Including @dyno_spectrum, @dwsracing, @dodsonmotorsport, @renaissancespeed, @soulperformanceproducts @forgeline and @p1motorcars

 

·
Trusted Source for McLaren Performance
Joined
·
474 Posts
Discussion Starter · #3 ·
That’s a 650s.
Well, actually it is a 12 Spider....with 675LT heads....with 650S intake manifold....and a 720S waterpump.

The point is that as a vendor we have the knowledge, the solutions and experience to push the power envelope for all McLarens, including the 720S.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top